Thanks for posting new views of your room. You are right, nothing can go in front of the paneling, and we won't block the built-in cubby. In that case let's work with the rest of the space. I found a picture on Houzz for your gallery wall. I think this will allow you to bring in color and texture and interest to your wall without taking up space like furniture would. Try to play with portraits and a couple of paintings in there too - mix it up. Otherwise I would not put anything at the top of that landing (I'd remove that console table). That picture wall should be enough visual interest to your space and it'll draw the eye to the furthest wall as you walk in your house. I would try a small piece with closed storage between the bottom steps and that door by the entry. It looks like the space is no wider than 26", so it'll be a challenge to find something that fits and is tall enough. I would not use the wooden piece you showed above because you want wider proportions and fairly narrow depth so you don't bump into it as you walk by. (something like this ) I would hang a mirror on top of primping. By the cubby you could add a single seat stool. I'm not particularly suggesting these colors for the stool and bombe chest but something along these shapes. At this point if you do that big picture wall and add these two pieces of furniture and a mirror, you might not need to hang anything on the wall above the cubby. Also, I noticed your chandelier is quite substantial for the space and hanging pretty low. Would raising it a little or replacing it by something a little smaller be an option?

Okay, so I like it simple and modern, big stripes, big blocks, love this and this I really like uncluttered look. like this to https://www.houzz.com/photos/murphy-beds-modern-rendering-phvw-vp~24435627 , and I like my dark grey's and browns not to mention light blues, yellows, oranges and reds clashy aye.(not sure if these colors will work with the wood, really like the idea of staining the wood darker to more like this https://www.houzz.com/photos/rubin-residence-contemporary-bedroom-san-francisco-phvw-vp~5202610). But really interested in your ideas.

@Tribbletrouble44152k7 Trek, no not necessarily.. it fulfills it's purpose if you buy the one that is correct for what you want it for.. a bit of a catch22 and up to the store to point out that the thin stuff may dent.. in fact any of it can... there are many things that will void warranty of laminate floors.. here is a good website dealing with the cleaning and care .. http://www.baneclene.com/articles/laminate-care-consumer.html Remove shoes with spiked or damaged heels before walking on the floor. Spike or stiletto high-heel shoes may cause denting and related damage to wood floors due to the extremely high compressive force they generate. Such footwear can produce dynamic loads in excess of 1,000 pounds per square inch, even when worn by someone of slight or average build. Worth reading the whole thing.. Just worth reminding people that laminate flooring is mdf with a picture of wood printed on the surface with a couple of protective layers of clear coating over the top..it cannot be wet or steamed.. it will swell. Make sure you ask questions.. Wood vinyl planking is very durable and hardy, and bamboo is considered to be one of the strongest timbers.. if you choose to have floors redone with any of the above products please look them up on google and find out the qualities.. I vote for wood vinyl.. looks brilliant, can float or be glued (recommend glue for wet areas such as bathrooms, laundries) is hard wearing and cost is comparable with mid range wood laminate flooring and hardier. Hope that all helps. If you must have wood laminate then go for 10 - 12 mm.. anything less will flex. Must have underlay and be laid on a level floor.. There are self levelling compounds you can use to make this easier... hope all this helps.

I didn't like any of the stock standard vanities I saw being sold. By chance I happened to see a second hand vanity being sold on FB so I brought it ( see photo). I liked its shape and solid profile but didn't like its colour. I took it to a auto car spray painter and had them spray paint it in Benjamin Moore Kendall Charcoal (a greige grey). They did an awesome paint job with a mirror like finish. I brought a piece of primestone (marble look) for the top, two small towel rails to be fixed in the underside of the vanity that is sticking out so I can hang hand towels on either side. I brought a new tap for it (but kept the vessel basin). I ordered in some new legs for it online because I didn't like the legs on it (see below). Its currently at a joiners getting put together. I've actually enjoyed the process of pulling it all together. Sure by the time it has been put together I probably would have spent the same amount that it would have cost me to do a custom vanity however I think there is something to be said for re-using something a second time round rather than buying into consumerism that abounds us. All up I've spent $1,074 NZD for the vanity, the spray paint job, new legs from www.prettypegs.com, the new towel rails from Reece Plumbing & buying a new Elementi tap. That doesn't include the joiners costs - yet. I needed storage in my vanity. This one fit the bill for me. Good luck with what you choose to do! I am doing a bathroom remodel as well and enjoying it.