Mona you have seen exactly the dilemmas I'm facing with this room so I really appreciate your comments. I was focusing on no1, but really 2 and 3 are on my mind too. In terms of getting some continuity between the rooms I was planning on recovering the dining chairs in a fabric to tone with cushions/throws on the white couch, ottomans in a matching tone, and pulling this colour scheme through into cushions in the formal lounge. I love the spring colours at the moment (greens, blues etc) which you can see i'm playing with at the moment but you might be able to see the painting in the formal room which is orange, red and yellow with a blue/purple base. So I'm very keen on colour and so tired of the brown carpet and neutral walls. I was also going to restain the dining table and chairs to a dark mahogany colour, and change the bar stools to something more modern. re: rug closer to sofa, I've done this and it looks off-balance with nothing else in the space. It seems to work better in the middle of the carpet area at the moment. Perhaps thats because I haven't ordered the ottomans yet. I don't want to add a coffee table to this room as prefer Ottoman to put feet up on. I've attached a pic of a rug, do you think something like this would work better? re the wall: yes this is the major for me at the moment. It is a TV room so tv and speakers stay and I wont be adding any custom cabinetry. The idea was to increase the space in this room by removing all of the cabinets and they are now in the adjoining room. The speaker covers have not been painted as I needed to work out what wall covering to apply, and colour etc. so once they are painted the wall colour they will blend in better. The idea of shelving has merit, I'll have to have a think more about that... Any other thoughts you have are appreciated.

Hello There: Your home looks like it has some good bones and period features. No one has yet to comment on marrying subway tiles on lower walls, with tongue and groove cladding on upper walls of your space. I am thinking this finished look could well end up looking quite "busy." Lots of competing "grid" lines, etc. If I understand correctly, this space is actually, or ultimately will be, a bathroom. Perhaps you do not want a wood product on lower sections of the walls because of potential water damage, etc. That said, there are excellent paints, sealants, etc., that you could apply that would guard against this. If painting, using Zinsser Sealant as base coat is a good starting point. As another alternative, you could use much larger tiles on lower portion of walls, oriented vertically. I am thinking 12" x 18" (or 24") tiles. Of course, these are more challenging to install, given their greater size and therefore, weight. Despite this, if you have an excellent tiler, it can definitely be done. For example, you could choose glass tiles, either clear or coloured. Going even further, you could install glass panels to lower sections of walls. You could "back paint" them or not. You could apply paint or even wallpaper (with a wonderful design and colour way you'd likely never tire of) prior to installing glass panels. The wallpaper idea, especially if design is more curvilinear in nature, would not be competing with verticality of tongue and groove, but rather, would complement and enhance it. If beautiful wallpaper (or heck, even a mural or timeless design could be painted directly on walls) is applied and then covered with clear glass panels, the overall effect would be akin to that of an art installation. Naturally, glass panels would be considerably more expensive, but would provide a more seamless, less cluttered appearance. Should you like this idea, simply check what thickness of glass would work best, both for aesthetic and safety purposes. If you have a bit of time to shop around for best supplier and price point, you could well suss out a source that will not "break the bank!" :) To affix glass panels to the walls you want to use hardware that is anodized. As an idea, you could use anodized lug nuts that are usually used for automotive purposes. I just looked up "anodized lug nuts" and see they are available in wide array of wonderful, decorative colours. This hardware would be visibly holding your glass panels in permanent place, but they would be a small attractive design element, ultimately adding another layer of visual interest to your space. I believe glass panels would tie in very well with your great, textured/mottled glass panelled door and transom. Too, I think the overall look would achieve a really attractive marriage as various materials, along with period architectural features would "read:" old, new, and timeless. I realize this design concept may seem counterintuitive to you and/or others, but I can "see it" and think it could be just fab! All The Best, Sharon Black, interior designer and contractor

Hi There, Not sure if you are still looking for art/canvas for your space, but I'd thought id share my work with you. I'm a contemporary Aboriginal Artist located in Newcastle NSW. My works have been commissioned for a number of personal and commercial spaces including John Hunter Hospital, OPSM (Luxottica) Australia, St Vincents Hospital Sydney and Taronga Zoo, to name a few. My artworks have also won a number of prizes including Singleton Art Prize, OneSight Global Ray-Ban Wayfarer Indigenous design which saw my artwork produced on Ray-Ban Wayfarers and Wild at Taronga where I painted a full size rhino. The following artwork is a 2 panel piece and tells the story of our nations’ journey and the coming together and sharing of culture. Large red meeting circles, central within the design, are connected reflecting unity and reconciliation across cultural diversity. The continuous unbroken smaller circles woven throughout the piece are symbolic of community, Government and Corporate and the commitment to work together around shared vision to create better futures for our children. Linked to together the circles are also representative of the inevitable flow of future generations and a passing on of the baton to our youth. Size: 600 x 1200 x 2 http://www.saretta.com.au/collections/online-gallery/products/cross-cultures-series-2 I also have a number of other artworks at www.saretta.com.au. All the best with your design. Saretta

There are some great comment here, but my take on this would be if you are going custom to take your time and look around. Many designers offer different takes on each person's preference. The colours you have are good but I'd personally would opt for a more warmer cream, with a self print pattern. I would also suggest pinch pleated curtains and not pencil pleat as you have currently, pinch pleated curtains will give you uniformed pleats from top to bottom. In addition to this I would suggest you use blackout linen to prevent light to enter the room, and possibly interlining so that you retain some thermal properties in your fixtures. Having custom made curtains are a lifetime choice for most customers, take your time and don't settle for the first company you come across. The space above your bed i would possibly add a sheer fabric roman blind which is slightly see through but enough to give you privacy if you bedroom is situated on the ground floor. You can also get the a roman blind to match your new curtains if you'd like a more repetitive theme in your bedroom. I would suggest if you do opt for a roman blind, and you are looking for a good qualities add blackout linen. If you would like a rough estimation on what you would be looking at we can assist you so you are aware of what most reputable curtain making specialist charge in this current market.