Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

When installing over top of old ceramic/porcelain be aware that you will most likely have to "sink" the old tiles in cement to do this. That means grinding down the tiles a little (rough up the surface) then the self leveling cement is poured and allowed to dry. The new floor is then laid over top. Vinyl is notorious for requiring EXTREMELY flat surface. A ceramic tile rarely has this requirement (grout lines and "high spots" around tile corners give problems). A glue in place tile is also going to have the same problems and the same solution = sinking the tiles in cement. This adds extra costs to the floor. A rigid floor like a cork floating floor can handle a bit more floor deflection than vinyl or laminate planks. If labour in your area is relatively cheap...you could probably have the tile removed and the sanding of the mortar done for the same price as coating in concrete. You will also have the luxury of being able to lay any floor you want once it is done AND you don't have to worry about increasing the floor height. It is possible to sink the ceramic in cement...but is it the most cost effective option? Maybe not.

Hi all. Two questions re my living room in a very cool but neglected house in NZ. Property was architect designed, built in 1980 but with a very sixties vibe. So it’s an eclectic / Interesting mixture of mid century architecture (floor to ceiling glass, atrium, flat roof, trees) but with 80s appointments (bathroom colours and fittings, crazy paving, floors, garden hardscaping, etc) After being built (to a high standard) it looks like it was neglected by subsequent owners. We bought it three eyars ago and have replaced the roof, skylights, plumbing and wiring. All stuff that had to be done. We redid the front garden because it needed it but it was also the first project we did for lifestyle reasosn as well – because we wanted to not just because we had to. Nice feeling. Two Questions : First - we’ve been here a couple years, and not really solved the living room furniture layout thing. The room is long and relatively narrow. It’s generously sized, but it always feels a little empty. It’s like it’s too large for a ‘single’ seating zone arrangement, but not quite big enough to create two distinct areas. The reality is I feel I have three different possible things I want to ‘look’ at – the fireplace, the garden via the beautiful end glass wall, and, frankly, the TV and Hi Fi. So we tend to settle on an L shaped arrangement, with the open part of the L facing the window and TV in summer, and reversing it so it embraces the fireplace and TV in winter. So what would I like? I’d like to create an area for talking and an area for tv watching / family time where the sofa s closer, but I’m stumped on how to do that without being too far away from the fireplace in winter (brrrr) or being too close to the very large window and its torrents of sunshine in summer (too hot to be comfortable and furniture fades fast in NZ high-UV sun). Ideas and thoughts welcome. Second question : flooring I was a bit iffy on the (original) marble tiling when we moved in but I've grown to love it. I hate the carpet though which definitely isn’t original. I’d like to replace it but can’t decide with what. I’d prefer something that links the three zones – kitchen and entrance area with its marble tiles, living area (currently carpet) and outside patio (grey concrete tiles). More tiles are out – pretty sure three different kinds of tiles across the three zones would look odd - so I’m tossing up w simply replacing the carpet (what kind? What colour? Grey to match tiles or amber-y to bring down colour from the brick wall?) or installing wooden floors. I was leaning towards wood except when we went to the wooden flooring shop both design consultants suggested simply replacing the carpet would look better (they’re wooden floor salespeople??????) which makes me wonder if they are seeing something I'm not. All advice appreciated. It’s a beautiful house, and any improvements I make are about lifestyle not resale value. I’ll be carried out of this place in a box.

Hi Temika We do this successfully on renovations. You do need to be mindful that the concrete under a copper washer are thick. Most floors can be matched successfully without over laying.