We are also building in Christchurch :) So also had to look at these kind of requirements for sun, but we had a much smaller section to work with (800sqm). If cost is OK ideally a 2 story would get light into more of the rooms. You also saod the street frontage is 35m but the plans say currently the width of the house is only 15m, so you could run more of the house along the frontage to get it aligned with North. Its a big section are you setting it very far back from the street? Or are you worried about privacy? Is there a view Northwards, otherwise if you can set back from the street and add hedging or plantings to increase privacy I would try and align as much of the living space to get the North and west sun. Depending on what your roof is like you could also add a clerestory to get light towards the back - we are using skylights as well for our back hall and bathrooms to make sure they get as much natural light as possible.

We are almost finalising our first home plans and would love some help please. Our list of "wants" clashed with our budget and we had to downsize a little. If anyone could help would be much appreciated. Bedroom 1 we are pretty happy with but would love to include a small study nook (just big enough for desk top computer and a chair. Bedroom 2 lost its WIW unfortunately ... would it be possible to put a wardrobe behind the bed and reshape the ensuite to lengthways? Any help would be most appreciated. Thank you all so much.

Hi, Thanks for the response. :) I am following CCC Residential Suburban and Residential Suburban Density Transition Zone. It seems you can build 1m from boundary without having a window facing the boundary. I thought it seemed close, but if it gives me more space on the sunny side of the property then I'm happy. I wasn't sure how worthwhile it was me building interior/external walls into my design. I think a real draftsman would only use my dimensions as a guide and bin my project designs. I've only used the boundary line to design the entire thing, then used some Objects to give a visual guideline.

Two things come to mind; -it is possible that there are two separate files and you have received only one. It may depend on the way the properties have been legally defined. Having two addresses is not necessarily the same as two legal titles. Check the type of title and whether it has been subdivided, cross leased etc. this should be on your title which you will have got a copy of when you purchased. If you do not know where that is, you can get a new copy from Land Information New Zealand (LINZ) for just a few dollars. I would also phone the council and ask them to check whether there is more than one file that could relate to your property. I think they would be helpful with that request. - this goes back to before the 1990s, when we got permits rather than Building Consents, and less information was required to be submitted. The older the files, the less complete they are likely to be.I would not expect to get complete information on work done in the 1960s, but you can hope for it.