All sounds good to meI love inverted boxpleat. Would suggest you stick with pleats for your main curtains but try not to get too busy with the sheers and keep them plain if possible. Examples of what you are thinking about would hel;p

Hello There: Your home looks like it has some good bones and period features. No one has yet to comment on marrying subway tiles on lower walls, with tongue and groove cladding on upper walls of your space. I am thinking this finished look could well end up looking quite "busy." Lots of competing "grid" lines, etc. If I understand correctly, this space is actually, or ultimately will be, a bathroom. Perhaps you do not want a wood product on lower sections of the walls because of potential water damage, etc. That said, there are excellent paints, sealants, etc., that you could apply that would guard against this. If painting, using Zinsser Sealant as base coat is a good starting point. As another alternative, you could use much larger tiles on lower portion of walls, oriented vertically. I am thinking 12" x 18" (or 24") tiles. Of course, these are more challenging to install, given their greater size and therefore, weight. Despite this, if you have an excellent tiler, it can definitely be done. For example, you could choose glass tiles, either clear or coloured. Going even further, you could install glass panels to lower sections of walls. You could "back paint" them or not. You could apply paint or even wallpaper (with a wonderful design and colour way you'd likely never tire of) prior to installing glass panels. The wallpaper idea, especially if design is more curvilinear in nature, would not be competing with verticality of tongue and groove, but rather, would complement and enhance it. If beautiful wallpaper (or heck, even a mural or timeless design could be painted directly on walls) is applied and then covered with clear glass panels, the overall effect would be akin to that of an art installation. Naturally, glass panels would be considerably more expensive, but would provide a more seamless, less cluttered appearance. Should you like this idea, simply check what thickness of glass would work best, both for aesthetic and safety purposes. If you have a bit of time to shop around for best supplier and price point, you could well suss out a source that will not "break the bank!" :) To affix glass panels to the walls you want to use hardware that is anodized. As an idea, you could use anodized lug nuts that are usually used for automotive purposes. I just looked up "anodized lug nuts" and see they are available in wide array of wonderful, decorative colours. This hardware would be visibly holding your glass panels in permanent place, but they would be a small attractive design element, ultimately adding another layer of visual interest to your space. I believe glass panels would tie in very well with your great, textured/mottled glass panelled door and transom. Too, I think the overall look would achieve a really attractive marriage as various materials, along with period architectural features would "read:" old, new, and timeless. I realize this design concept may seem counterintuitive to you and/or others, but I can "see it" and think it could be just fab! All The Best, Sharon Black, interior designer and contractor

I had a similar situation replacing a thin porch roof, the down pipes that spoilt the simple lines that the posts and flat roof had, basically down pipes just looked just looked heavy and ugly. I fitted the gutters in level as these are short anyway and don't need a fall, but left off the spouting. Then by suspending a heavy* galvanized chain from the centre of the outlet down into large buckets set into the ground, which is filled with rocks or small lumps of concrete, the water will trickle down the chain. (that is a thicker gauge, not heavy* weight). You might also want to anchor the bottom of each chain onto a lump of concrete. You don't have to anchor the bottom, but you don't want anyone to be encouraged to swing on them. Obviously you won't see the buckets, but do need something to capture the water that runs down the chain. Small holes in the buckets allow water to run out gradually. The chains will hang down straight under there own weight, the look is more 'elegant'. If you get so much rain blowing off the chain that it blows onto the posts or house, it's very likely you won't be standing outside, unless you like getting soaked.

Huge artworks and mirrors that are leaning would still have to be attached at the top somehow, wouldn't they?? Surely they would be dangerous otherwise, especially in areas prone to earthquakes (even small ones) and in homes with young children. Imagine something that size falling onto someone!