~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

Excuse my duh-ness but i'm having difficulty trying to follow whats going on here. Are these two photos an exact replica of your house and pool ? If not a hasty sketch with dimensions could help a lot. By kitchen wall do you mean the wall behind the bar ? And where is the pool wall ? Are you considering the covered area as being "inside" ? Sorry for all those questions lol Sometimes when you have a design problem you need to turn it inside out or on it's head. If you can't beat it maybe embrace it by making a feature of it : i.e. contrast by having the lightest colored pool surround and a great blue or tile inside and under the overhang, something that will echo the water color ? If you have a great covered area as in photo you'll most likely be spending a lot of time there and it could be soothing to be able to sometimes retire into a darker inside. In my book, 10M isn't small and also contrasting two floor colors doesn't necessarily make a space seem smaller and confined and may in fact even open it up. Could it be that you've thought yourself into a box here ? Sometimes one needs to give it all a good shake up and see how it resettles.

Thank you. My husband and I chose the tile (per recommendation at the tile store) and used a professional tiler (per recommendation at the tile store) for the install. It isn't a flip. This is a family home that we purchased and spent a year renovating—not DIY but with all professional hired help and a contractor to oversee the job. This tile person wasn't hired by him, though, as he was happy to use the person that we were told was very good by the tile store…. My heart is sinking. I absolutely hate the idea of retiling the shower as there is matching tile on all walls, including shower. I'm hoping there is some other idea out there that will help. I do personally think the tiler should have informed us if the tiles we supplied to him weren't suited to be mitered…we discussed it even before tiles were purchased and he didn't mention any specifications. I'm just worried now that if we put it on him to fix it, we'll end up with a bigger mess...

We have a 900x900 shower and it's plenty big enough. Neither of your proposed layouts looks that great, to be perfectly honest, sorry! In the first layout, you could improve it quite a lot by swapping the toilet and vanity (centre the toilet under the window on the bottom right of the picture if possible), and having the shower door on the other wall (beside the door). Then, you could have a towel rail on the wall beside the door (i.e. behind the door when it's open), which would be accessible from the shower but hidden when the door was open. An 800x1200 shower might be a good size for your space. You'd have to choose a toilet that doesn't protrude too far, plus a narrow vanity. With that layout, you could have a long but narrow wall-hung vanity, with a big mirror covering the wall between the windows, which would make the room feel bigger and would give a good amount of storage. Also, you may find this helpful: http://www.houseplanshelper.com/small-bathroom-floor-plans.html?utm_content=buffer4aa20&utm_medium=social&utm_source=facebook.com&utm_campaign=buffer