Catherine the panel blinds could be your solution. They are available in sheers, patterned, mixed etc and operate on a track system. It's an update of the verticals that a lot of homes have. If you have Ikea in NZ you could sus them out there.

Not yet. We actually have JUST engaged an architect to draw up an older school house we are hoping to purchase and use as an addition onto the left hand side of the house. Obviously if that purchase goes through, we will hire the architect to work on both the connection of the new building to the house as well as the front entryway. Here is the floor plan of the house. The small bedroom (bedroom 4) sits directly behind the lounge. We are also thinking about removing part of the wall there so that you would walk into the home and see directly into the lounge or turn slightly right and enter the kitchen.

Unless buying custom manufactured wood cabinets, you are buying a series of boxes. A 100k euro kitchen installation of an Italian kitchen is one example from my portfolio. Differences are found in the hardware, the door/drawer pulls, weight of doors and exterior finishes. It is about the design, first. In our region, you can knock off 1200-2000 just be sticking with a full depth fridge--but it is design that will make it possible to install full depth and get a counter depth effect. In the Garden Oaks Fine Accommodation residential display suite I needed to prove that a high-end design can be executed for less. Again, it is design that does the trick. The owner of the kitchen above loves the pendants over the breakfast counter. I did not have the heart to reveal the price--$19 each. That owner likes/needs bling so the 14k euro chandeliers (2) in the foyer are a feature. But we get more comments on our pendants--because they are integral to the overall design. Real estate agents have pegged this kitchen at anywhere from 45-75k. It cost under 30k. DYI projects offer the opportunity to take the time that you might not otherwise allow to a designer (hence our need to come equipped with knowledge, contacts and suppliers that augment our services). I recommend drawing from images (Houzz is great for that) to start, then researching suppliers, collecting specs, and developing a document that covers all aspects of the kitchen from lifestyle needs to style to comparisons of product reviews. Whittle it down to an instruction for purchase and installation. Consider challenges such as the dreadful corner cabinet turntable and splurge on solutions that make your design truly functional. You'll appreciate the expense that delivers practical functionality. There are remarkable solutions for the corner cabinet--but my fav is to determine whether that space can become storage (cabinet or drawers) in an adjoining room. When not practical, articulated pull-out stainless shelves are functional--and cool. Undermounted sinks are great for clean-line counters. Well placed recessed lighting (design again) eliminates the need for other fixtures--and allows you free rein to purchase for focal point impact or (my preference) to fit seamlesly into the overall look. Enjoy the journey--have fun!

Thanks for the suggestions. Barn doors are the general idea, hanging off the exposed truss above - but there's no wall space on one side. We were planning on stacking the doors all to one side and into a specially built "pocket" when we want to open up the space. Then we discovered the designer was planning on putting a track in the floor, and we weren't so keen on that - not so nice looking and also a trip hazard.