First be okay with the fact the bathroom tiles might need to be replaced. All of them. Replacing them in the bathroom will have the least impact on the rest of the house and whatever comes out in one piece, can be stored for future cracks. Maybe you can find a similar color but a different size, so it won't look too awkward, just an idea. Taking out a cracked tile is quite easy. Put on some gloves and safety glasses and (carefully) smash the broken tile with a hammer. An old screwdriver or chisel will help you tilt the pieces out. Work from the hole outwards to remove the other tiles. Removing a good tile is nearly impossible. Assuming it is still glued firmly, I'd say impossible. But, if you want to try anyway, you'll need to mill out the grout and then figure out a way to lift the tile..

Hi All, We are updating our bathrooms and I need to choose the color of the tiles around the vanity, shower and bath (including wall and bath boxing). One of the bathrooms has dark brown ceramic tiles, timber ceiling and brown timber wainscoting. The other two bathrooms have brown timber floors and neutral colored walls/ceiling. The light in all bathrooms is low to medium. I have chosen white vanity tops, with white basins and chrome taps. Do you think it would be too much white if all the tiles were white? Is there such a thing as too much white? Also what type of tiles are the easiest to install? Thanks

Are you faced with the question of choosing between Epoxy Grouting or Cement Grouting for tiling? We'd love to hear what you think! No doubt, kitchen and bathroom tiling can look dull and begrimed when grout begins to flake or discolored. Over time due to wear and tear, some surfaces require an excellent type of sealing between dissimilar surfaces like countertops, and underneath basins and sinks. For these areas, we need to choose the best grout for tiling. Do you know the difference between cement grout and epoxy grout? If not, then continue reading this article because we will compare both these options, and help you choose the best one. No doubt, Epoxy grout has become the most widely used option for grouting. Various renovation companies around the world, especially in New Zealand are using Epoxy grouting in tiled showers, and floors.However, there must be a reason for it. Here is what we think, read our recent article we've just posted on our website for a full comparison and explanation, plus pro and cons of both options. Tell us what you think :) Epoxy Grout VS Cement Grout for Tiling: Advantages & Disadvantages https://superiorrenovations.co.nz/epoxy-grout-vs-cement-grout-for-tiling/

I wouldn't do skirtings . I'd do the floor tile for '1 tile' up the wall ( assume they are 200 x 200 or 300 x 300 -- cut them if 400 or 600 ) . Personally , I'd probably even do the 'silver' tiled areas in that 1 height darker tile too , as it would make the whole room look more 'level' , but thats up to you and your tiler .