I would suggest your plumber links the hot and cold fill pipes to the supply UNDER the sink - this gets rid of unsightly pipes and while he's there get him to move the taps to the L side of sink. I would then create a broad drop down counter top to create a place to sort your laundry ready for hanging out to dry or to fold ready for ironing This drop down counter top to be hinged to R side of washing machine and ensuring the taps are not impeded. If you can't do the drop down version then create a free standing top made out of a piece of MDF/laminated board to put over the sink and washing machine for clothes sorting & folding. This free standing top can 'live' at the side of the washing machine when not needed. I would then put shelves above the folded back counter top to store washing powder and sundries. I would store the washing powder etc in colourful or white boxes to keep the place looking tidy and uniform. Handles on the boxes for ease of access. Oh I do love organising - can I pop round and do this for you? Hope all goes well with the changes.

Yes, measurements would help. Thank you aldrea1 for other explanation, though. That helps too. It sounds like you are going into a total gut-job! I love this! Great opportunity for your creativity. Also, it looks like you have a petite sized stove. With total remodel you can upgrade to a standard size range. Is this part of your plan? Are you going to replace any appliances? It would be good for you to keep sink and stove in original locations. It is complicated to move the stove's exhaust fan and the sink's plumbing. Not impossible, but probably $$$$$$$ and a lot of hassle…. So, I would start planning with those items--stove and sink on current walls. Wherever you put your refrigerator, it would be best to be sure side view is hidden. If refrigerator stays in current position, you could make peninsula a little smaller, so wall on the right of kitchen entrance could extend further and hide refrigerator edge----Or, move refrigerator to another location… Not too far from sink and counters, though. That would cause you inconvenience. You want a work triangle with not that many steps in-between. Do you currently have a dishwasher? Or are you planning to add one? Not much creativity in placement of a dishwasher---needs to be near water source and drain.. Are you doing the work yourselves or hiring a contractor?

I could see doing something like French doors with opaque glass so the lite could come thru to the rest of the house. Also double French doors would allow you to open the area up completely whilst doing laundry. You could even leave everything where it is (dryer) and build some storage on the left side. I would image the sink would be very useful - I'd be lost without mine in the laundry room.

Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)