The best cleaning for very dirty tile joints

Cleaning the tiles can be quite an easy job, but the joints between them tend to accumulate dust, grease and dirt, which, if they come into contact with moisture, end up generating quite unpleasant fungus. To avoid this, follow these tips and you will have tile joints looking as clean and white as the first day they were installed.

How to keep joints clean

Regularly cleaning your tiles takes little time, and will help keep them looking their best, so cleaning them later is really easy.

The methods that we are going to show you below can be applied regardless of whether your tiles have been installed recently or if they have been in use for years. Apply them consistently and you will be surprised by the results!

Methods for cleaning tile joints

Cleaning tiles with baking soda

Baking soda is an antiseptic agent with well-known uses in the cleaning industry. It removes residues and bacteria from almost all surfaces easily and quickly without leaving residues or strong odors in the environment, in such a way that it is ideal for the home, especially when there are small children and pets that may be affected by allergies to food. overly abrasive disinfectants and cleaners.

To effectively clean the tile joints, you will need hot water, half a cup of baking soda, and a brush.

Gradually add hot water to the baking soda until you have a smooth, creamy paste. With the brush, rub the mixture into the joints and leave it to act for 15 minutes . Rinse with lukewarm water or remove it with a cloth, and voila, you will see how with this homemade trick the tile joints change color quickly.

For really strong stains, such as those that form in places that come into contact with water, use the following trick: mix equal parts toothpaste and baking soda. With it, scrub the joints and let it act for between 7 and 10 minutes, remove it with water , you will notice the result immediately!

Tile cleaning with ammonia

Ammonia is a very strong chemical agent that, although it is effective in cleaning surfaces, must be handled with great care, since it is highly corrosive. It should never be used in its pure state, because in addition to having a strong odor, when it comes into contact with oxygen it generates an irritant to the eyes and skin.

To apply it you will need to wear thick gloves, a mask, and a mask. Be sure to ventilate the place as much as possible. If the joints are very dirty, use a solution of 30% ammonia and 70% warm water. With it, quickly brush the joints, leave it to act for three minutes, and rinse with clean water.

cleaning tiles with vinegar

Among the first products used for cleaning, white vinegar has been a favorite for generations around the world. It is a bactericide, natural dirt remover, non-polluting, and ideal for cleaning the home, particularly the kitchen, bathroom, and the place where your pets stay.

Since it is a mild-acting agent, it is ideal for the new floor and tile installations, it is also quite economical and does not pollute.

To carry out this cleaning, you must mix ¼ cup of warm water with ½ cup of vinegar, stir well, and rub the joints with this liquid, leaving it to act for 15 minutes. You can rinse it with water or simply remove it with a damp cloth, with the additional advantage that the tiles will also remain absolutely shiny.

Cleaning tiles with hydrogen peroxide

Hydrogen peroxide has a great capacity to remove dust residues, mold and traces of dirt, in the same way that it cleans wounds. It works great when the joints only have a small gap of mold or dirt.

You can take a disposable glass and put some hydrogen peroxide in it. You only need an old toothbrush, which you will dip in the water to scrub directly on the stain. At this point you will immediately notice how the hydrogen peroxide begins to act, producing foam quickly.

Let it do its work for about 7 minutes, and then rinse with lukewarm water. It's very easy to apply, plus it's non-polluting and doesn't have any uncomfortable scent, so if you don't like strong-smelling cleaning products, this method will be ideal for you.

Tile cleaning with bleach

If the smell of bleach doesn't bother you, using it is an excellent option to clean joint stains quickly. You can use it directly or mixed with water, depending on the strength of the dirt.

In both cases, it is better to use face masks, since the bleach applied directly tends to create vapor in a short time that can affect the mucous membranes, causing coughing, burning eyes, and, in some sensitive people, a sore throat.

Keep in mind that bleach removes the color from clothes, so if you are going to use it, wear old clothes, or clothes that you don't mind damaging, because where this chemical splashes on you, the fabric will be white.

Apply the bleach on the stains, let it act for 5 minutes, protect your hands with gloves and scrub with a brush and a lot of energy. Rinse with cold water, wipe with a clean cloth to dry, and you're done! the joints of your tiles will be like new in a very short time

It is always a good idea to seek an external or outsourced professional cleaning service in all states and cities in Australia to take care of all your professional cleaning needs.