Thanks :) Yeah decided to go with tile. So sand cement is ok over existing tiles if I prep them first? Only problem is, the new pad can only be about 30mm at it's thickest (leaving up to 15mm for tiles) otherwise it'll end up being higher than the hallway floor. So I either need to make the fall shallower or not bother with the waste and make it all level. If I made it level, could I use levelling compound at that thickness or would deck mud/sand cement be the best option? Also, should I be putting in mesh for strength? (I know I should (and will) ask the local hardware what they suggest, but it's great to have suggestions from the Houzz community also)

Hi Luke, thanks for your reply. Yes, there is existing plumbing but we need to create a gradient somehow on the wood floor. Concrete floors can be ground to create the gradient but need to come up with some other solution with the wood.

We currently have a deck on the first floor over the garage. It construction is wood with a water proof membrane over, that is now leaking, with carpet that is used on boats over the top. What would be the lightest and best floor covering to use when we re do the deck?

Purchasing this 2400 sq foot home near the beach. Love the open floor plan but want to update it. We are definitely planning to redo kitchen and floors and paint but am stumped with how it all should be laid out. The main floor consists of kitchen, LR, and sitting room which currently houses the dining room table. I am considering having the wood fireplace removed altogether as it doesn't get much use in low-country SC but am not sure how to lay out the room without it, e.g., where should LR go and on which wall should TV go? Also considering converting the f/p to electric so that it is not a hazard and can be the focal point of room and place to mount TV. The home will also be used for short-term rentals so having a TV and dining room table are essential. Any and all suggestions are greatly appreciated.