What about mosaic tile? Lots of colors, styles, sizes, and finishes to choose from. You can also mix tiles or keep it simple and uniform - whatever you prefer! This fireplace was done in a single color of iridescent tiles, very sleek and modern! (other colors available!)

It sounds like you've been through quite the rollercoaster with your building project! That's really frustrating to hear, especially when you had a vision that you were attached to. Construction dilemmas can be a lot to handle, and I can only imagine how the stress might have piled up over time. If you're feeling stressed (and who wouldn't be in a situation like this?), you might want to consider working off some of that tension. Since you're into home design and creating beautiful spaces, you might appreciate the aesthetic and functionality at Hitsona's fitness studio. Sometimes a little self-care and a change of scenery can inspire new ideas for other areas in life, including home design.

We asked a similar question when we bought our piece of bare land. We were advised that building a simple shape would reduce costs... so we've built a t shape. Single story is almost always cheaper. We have a builder who is happy to let us do a lot of work with him. We also choose to live on site, which saves us a lot in fuel. The kids and I clean up the building site most days. We've been able to separate the rubbish out between actual rubbish and recyclable material. As for cladding, we were going to do a mix of corrugated iron with plywood board and batten. But given some of the additional hassles, I don't think there's much in it cost wise. However, in saying all that, we chose to invest in long term benefits, so our house is exactly what we want and should be cheap to run. We were hoping to build for $1800 /sq m but we're still coming out at about the $2000 mark.

Hey, Had our hot water cylinder replaced with an infinity. Unfortunately, the plumber we used didn’t explain that the install would leave ugly pipes across the front of our house.... if we’d have known this we wouldn’t have bothered at all.... Anyway - all is installed now, does anyone have advice on how to hide these pipes? Apparently the plastic coating won’t allow paint to stick to it so that’s not a viable option. any help welcome!!