Hi again- I have been looking at Benjamin Moores colors and have chosen a few you might look at. My technique for color choices is to buy several large sheets of MDF from the hardware and several paint samples that I think will work. Grab a plain white sample pot as well and just play with colors; if what you thought looked good in the shop and doesn't look good in reality, just add a bit of the white to lighten it and use the darker tones to deepen. Once you've found the color you like paint it on one of the large MDF sheets and live with it for a day or two and see how it looks morning,night, south side of building,northside of building. If the color that you like is one that you've mixed yourself, just go back to the paintshop as I'm sure B Moore would have the right shade so you can match it. Do you know the color name of the roofing? Is it IRONSTONE or MONUMENT? I'd be tempted to use that same color for the windows. My personal trick for contrast and trims is to take the main color and ask paint shop to make it up in 1/4 strength even lighter if need be. Good luck and post pictures when it's finished.

What a fantastic architecture. When you do the brick, if you stain it with masonry /concrete stain you won't have the same issues of maintenance as with paint. They will spray it evenly - through you will have to select a deeper color - either taupe (brown-gray) or a straight charcoal. Love your windows and the classic angled railing. I think a dark gray on the siding will make the orange brick jump even more. What bothers me is the white (railing, fascia, eaves) juxtaposed with the earth toned stuff. So I would recommend camel tones - for the siding - something like http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/SW6108-latte/ and the hopsack next darker tone for the garage door. Use the lighter tan for trim that is now white - http://www.sherwin-williams.com/homeowners/color/find-and-explore-colors/paint-colors-by-family/SW6107-nomadic-desert/ Use the darkest tone if you are painting concrete steps. If you think you will stain your brick charcoal, then the white eaves and trim are probably right, and you may not want to paint it tan now and then go back. If your brick were charcoal, then I would block out the rest in grays and blue grays - leave the white eaves, but take the railing and posts charcoal too. A blue gray door - like sw smoky blue.

Oops! Your trim looks grayish blue to me. Sorry, didn't see it is charcoal until afterwards...well in that case, I think I would still do gable and wrought iron as mentioned but then try a bright yellow, like SW's BEESWAX is paint color. Are you in the islands? Sorta has "that look". Envy : )

Thanks for all the great ideas everyone and sorry I didn't explain the polycarbonate a bit better :) This is along the lines of what we'll be using... http://www.psp.co.nz/building-brands/corrugated-sheeting/suntuf-polycarbonate The area is an absolute sun trap and we're hoping to use it as an extension to our living space, especially on rainy days! I've just sent my husband out to get a few pots of different stains for is to try - darkest brown (cedar) and a lighter brown (rustic oak) both by Cabots + the black we already have. Hopefully we can decide between one of those! I probably should have mentioned we will have black aluminium pool fencing running along the top of the second retaining wall - so the real question is do we keep everything black (pool fencing, horizontal fence, retaining walls and pergola) or do we go with a dark (or even light) brown for the pergola and retaining walls.... We just keep going around in circles at the moment. Decisions, decisions! Thanks again :)