What about mosaic tile? Lots of colors, styles, sizes, and finishes to choose from. You can also mix tiles or keep it simple and uniform - whatever you prefer! This fireplace was done in a single color of iridescent tiles, very sleek and modern! (other colors available!)

You have "wear through" which is when the finish is pierced and the wood is exposed to the elements. The dark areas are where dirk/water/mud have stained the floor. It is possible to get this out... but probably not all the way. A floor that has wear through needs to be sanded right down, stained (if you wish) and then refinished. Patching can occur...but it is almost always a waste of time because the "look" can be very different from the original sitting right next to it. I don't recommend it for your situation. The second photo shows the deep scratching. Ideally, you would have had your floors looked after BEFORE wear-through occurs. There are some "regular" scratches to the Left in photo 2. You can see it is visible...but no discolouration....THAT is where you draw the line. The darker "wear through" to the Right in photo 2 = too late = full sand and refinish. If you catch it BEFORE wear-through, you can do a "buff and coat". This is a light sanding with a few coats of high end finish over top. The buff and coat is roughly half the price (in Canada at least) as a full sand/refinish. For this reason it is important to catch the floors before you get to this level of scratching.. That being said, you now get to pick some stains (test patch, test patch, test patch). The first photo shows two different woods...you could ask to see if the lighter would could be matched to the darker wood (lots of testing to achieve this). It won't be pefect...but then again you wouldn't have used reclaimed building materials if you were after "perfect". The match can lessen the colour variation to a more manageable (design wise) level. As for "good for dogs" - natural colour of wood = best colour for scratches. A lower gloss (like a satin) can help. You can ask for the "best" finish with scratch resistance that comes in a can. You will pay a premium for it...but it could/should save you thousands of dollars over the long run. A highend, scratch resistant finish means you can get away with the cheaper buff and coats (every 7-12 years...or so) and be able to retain the original (expensive) finish for the full 25 years. The other thing to note: dogs claws require trimming 2-4 PER MONTH when working with hardwoods. This is what the hardwood flooring refers to as "routine" trimming. Some of my clients thought "2-3 PER YEAR" was "routine". I laughed. You have heavy, high energy, powerful dogs. A single lab can cause some damage over time. Two labs can do a number on a floor. Three labs and you have a very short lived hardwood finish. You have 7. I would find the most expensive, scratch resistant finish available in Australia. I would have the maximum amount of finished put your floors (you will pay extra) it and I would budget for a "buff and coat" every 5-7 years.

Your deck will be amazing. It has fantastic form and plenty of architectural interest, it will add enormous benefit to the front facade and street appeal. I love your palette, it is simple and still has point sof interest. MY suggestion would be to use a combination of your exterior colours applied where best to highlight the deck structure and either tie in, or accent against it. Ding all of these things by painting the lower retaining section in the base grey the charcoal colour to continue and blend into the lower floor brickwork, also do this charcoal on the upper deck frame which is also the roof of that entry way. I am trying to say that thick timber which trims the deck. And the slatted section of the stair wall which acts as a breezeway in the light grey- why? Because the open sections of the slats will always appear black as you can see through them to under the satirs, and the light grey slats will stand out and feature that shadow line, perhaps even use liting to further enhance this detail. Lastly, the stair treads themselves left natural, like an architectural contemporRy stAtement, the natural timber tones will be rich and sophisticated and act as art inviting you to the home. These stairs would really pop and be commentedon at street level, also consider lights in each tread, perhaps the slatted wall side to highlight both this and the stirs for night practicality. What a stunning entrance. The natural character in rich timber tones will warm the grey, keep it contemporary and not introduce personalized colour, which can take away from street appeal. This on the other hand, appeals to everyone. And greenery, landscaping will only take this to the next level. Literally!

Excuse my duh-ness but i'm having difficulty trying to follow whats going on here. Are these two photos an exact replica of your house and pool ? If not a hasty sketch with dimensions could help a lot. By kitchen wall do you mean the wall behind the bar ? And where is the pool wall ? Are you considering the covered area as being "inside" ? Sorry for all those questions lol Sometimes when you have a design problem you need to turn it inside out or on it's head. If you can't beat it maybe embrace it by making a feature of it : i.e. contrast by having the lightest colored pool surround and a great blue or tile inside and under the overhang, something that will echo the water color ? If you have a great covered area as in photo you'll most likely be spending a lot of time there and it could be soothing to be able to sometimes retire into a darker inside. In my book, 10M isn't small and also contrasting two floor colors doesn't necessarily make a space seem smaller and confined and may in fact even open it up. Could it be that you've thought yourself into a box here ? Sometimes one needs to give it all a good shake up and see how it resettles.