Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

Hugi Concrete Basin 640mm from Stonebaths NZ. Shop from exclusive and wide variety of bath accessories.

Hi, I would like to know how to insulate concrete walls or atleast make the walls look good. All internal and external walls are concreted block built and are exposed, only painted. Thank you so much

I'll say it straight out -- I personally don't think the style of fence matches the style of house . But not painting it makes it even more obvious . Maybe you need a new friend haha . Me -- I'd render the wall , and paint in an English Cream , AND do the 3 gables and the boards above the garage door and any other trim in the English Cream too , to tie it all in . IF the bricks were still available , I would have gone down that route , with the rendered fence pillars ( and gables and trim ) in an English Cream , or possibly the pillars in the same white as the house bits , but generally I'd try and go a bit closer to the brick colour than 'just' a white . It's workable , and almost anything would be better than leaving the blocks as they are IMO .