I think it is awesome to give a piece of furniture a new life. It is sometimes a bit daunting to take a paint brush to a piece made from genuine old timber but if you are going to get many more years of life and enjoyment out of it I think it is better than dumping it. I believe it shows your love. jbof4 I started with a heat gun to remove most of the many layers of paint, (some are easier than others to strip this way). Then I used an orbital sander and sanded and sanded and sanded. You might also try liquid paint stripper although I find this very messy. I believe you can also get them professionally stripped. Good luck with the resurrection, go for it what have you got to lose.

As chookchook said in her recommendation about painting, put a drop cloth on the floor. Get a very safe ladder. remove the lightbulbs, and cover the outlets. Turn off the electricity to the chandelier. Then spray it with a mild cleaner (I use one I found at Target that's basically water with vinegar, until it's dripping wet. Start at the bottom and work your way up, so you don't have dirty spray dripping on the bottom of the chandelier.Work your way up and down until the dripping spray is clean. The chandelier may be gorgeous and expensive, but it seems totally out of place in the architecture of the room--more at home in a chalet than a sunny room with a window wall. I would probably try to find a way to get it removed, and sell it to someone who appreciated it better than I.

Hi Joanna, It really comes down to three questions that you will need to ask yourself; 1. How much can you afford now 2. How patient are you... 3. How much maintenance do you want to provide Screens will give you an instant effect and won't require any ongoing maintenance and they would provide a more modern aesthetic to your space. They won't help to soften your space though, and as you have a lot of hard surfaces I would certainly recommend you look at trying to achieve this. You could achieve this by growing some climbers up the screen or by planting planters in front. In terms of colour, I would go or a darker one as this will contrast well to your existing surrounds but darker colours tend to disappear into the background visually, so it won't feel as cramped. In terms of cost, i'm not sure exactly how large of an area you need to cover, but they can get quite expensive. Prefabricated screens you can get from hardware stores are the most cost effective but are limited by design and colour. Custom ones are more flexible but will cost around $900-1500 per 2m H x 1m W panel, plus labour. As for plants, here is where the patience comes in.... If you can wait for the plants to grow in, this will provide you with the most cost-effective approach if you get the plants young. However, you can scale your decision to suit your budget with either small, medium or mature plants. Medium-mature plants are likely to cost less than getting custom screens built and installed, whereas small plants might cost the same as a pre-fabricated screen choice. Plants will also soften your space, but will also require the ongoing maintenance and without a strict schedule, you may end up with a similar problem with pests like your Portgegues Laurel. Gardening and garden design are all about weighing up your priorities vs your ability to compromise against budget, patience and ongoing maintenance. In answer to your question - It's not about what I would do with the space! You need to live in it (and pay for it!), so make a decision based on what you are comfortable with now and into the future. Whatever you decide, any change to your garden is worth the investment! Good Luck! Martin City Botanics

Hi Mandamaree, You are fairly limited in space and in the size of the bedrooms to introduce what you request without compromising these spaces and future expansions to the house. The lounge too is a bit of a thoroughfare in the current layout. However, a few suggestions to ponder. Ensuite to B1, this could be just a 1m wide x 2.7m long space either along the wall to bedroom 2 or expand the wardrobe to 1m wide and re build a 600mm int. depth W/R along the B2 wall. If you used the existing wardrobe for the ensuite though, B3 would have no robe, but if it is to be a study, this may not be a concern. Alternatively, you could build in the space where the back door is and incorporate a toilet beside the laundry. Put the back door in the laundry. The toilet could be either beside the bathroom or B2. You could also economise by not having two accesses to the back corridor. (one from the living room and one from the kitchen) If you are looking at renovating the kitchen, I'd block off the back hall access opening and build a full wall of bench and joinery along that wall and either make an opening in the wall between the kitchen and living room or open it all up, except the back 600-700mm portion at the end of the joinery. If you remove the wall between the kitchen and living - might need a beam to replace it, then I'd extend the peninsular bench between the dining and kitchen, making sure it does not make the dining too small. You should have a minimum of 1200mm between kitchen benches so 2560 is good for this. You can butt the dining table upto the peninsular and still have 5 people seated around the table rather than have a breakfast bar. The space is too tight for a bar. Storage - always a drama in these older homes. Work high level units into the laundry and if possible, the bathroom. If you can afford to lose a few mm from the living room, make B2 robe the proper 600mm deep and include the old fireplace area too. As it is only a guest room, make part of that for the storage you need, i.e, suitcases, boxes of 'stuff' etc. The robe in B2 should be no less than 1200mm long to future proof this as a kids room or for rental. Hope that helps. Cheers, Christine.