~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

Hi anne, that's what I was originally thinking, my issue is what colour I use for the 'pop' :) I keep coming back to a teal/turquoise colour (it's one of my favourite colours!!), I love blues, purples, teal/turquoise - many on here have suggested yellow but I'm really not sure about it. Here in New Zealand we're in Autumn, nearing Winter so uncertain about the yellow. I found these cushions that I've fallen in love it, and wondering how I could make these work.. do I try teal and mustard together, as an interior designer suggested?

Thanks for all the great ideas everyone and sorry I didn't explain the polycarbonate a bit better :) This is along the lines of what we'll be using... http://www.psp.co.nz/building-brands/corrugated-sheeting/suntuf-polycarbonate The area is an absolute sun trap and we're hoping to use it as an extension to our living space, especially on rainy days! I've just sent my husband out to get a few pots of different stains for is to try - darkest brown (cedar) and a lighter brown (rustic oak) both by Cabots + the black we already have. Hopefully we can decide between one of those! I probably should have mentioned we will have black aluminium pool fencing running along the top of the second retaining wall - so the real question is do we keep everything black (pool fencing, horizontal fence, retaining walls and pergola) or do we go with a dark (or even light) brown for the pergola and retaining walls.... We just keep going around in circles at the moment. Decisions, decisions! Thanks again :)

@thinkforothers, Ha-ha that's so funny about your American trip but yes I use the duvet as a top sheet. As for getting the dooda back into the cover, I have a pretty simple method and it doesn't take allot of effort nor does it include being swallowed up by the duvet in the process as you said ha-ha..... but there is a bit of back and forth around the bed. I flick the duvet open onto the bed, I grab the one corner of the doona head up towards the respective corner and pull the duvet back towards my hand a little too and place it down, repeat on the other side, then I grab each top corner seperately holding the doona firmly in the corner and pull it up to the headboard, whilst walking back to the end of the bed I lift the cover slightly, allowing the doona to get further swallowed up by the cover, then I'm left with slipping either corner of the doona into the duvet. I do up the buttons then holding the bottom of the duvet, I flick the cover, towards the headboard, so that the doona edges forward in the cover and even flick the doona on both sides of the bed left to right and vice versa and it's usually perfect. Its very easy doing a single doona by again spreading the duvet over the bed, grab the doona corners, one in each hand, walk them up to the corners, lay it down then pick up the dooda by the top corners and shake a few times just straight down, even stand on a safe stool or on the bed and you will usually find the duvet with eaze it's way down with just the bottom corners to slip in and again voila!!! Unfortunately, when I bought two of my duvet sets from Ezibuy, I bought NZ king which is a bit wider that an Australian king size and I didn't know that at the time and I have a bit of slack on the sides but it doesn't cause any problems and what I mean by this is, that the doona doesn't slip all the way to the left or right, it does stay in place. Hope that explanation was clear, I should do a video ha-ha Cheers, Barbara