When you're doing lighting in a kitchen it's a good idea to have good directed light over the main tasks areas, cooking, dishwashing, food prep. You could achieve this with downlights directed at those areas, or track lighting where you can direct/angle each of the lights on the track. Re the pendant over sink area, would need to be at a height that ensures safety - water & electricity, not a good combo. There may be some NZ standards that you can refer to, to get the correct info.

I have your setup #1 and it works well, we do drip a bit of water on the floor between sink and dishwasher, but you learn not to!! Also it gives a full clear bench on the peninsular for eating, setting out, or working or whatever. Your kitchen is slightly narrower, from memory ours is 1.6M not 1.3 as you have yours, Our peninsular has a circular end which has actually proved very beneficial for sitting round, and seats up to 5, meaning you are not sitting in a long line, but facing each other round the end, - I love it, it is a real gathering point. The outer side of the peninsular curves in to the centre, then flows out to make the circular ending, so its not protruding into the kitchen but into the other side, sorry I don't think I can add a sketch to this.

Thanks for your comments everyone. We've taken your advice (Luke and NH) and changed the island to a rectangle (1200 x 3000). We lose one breakfast bar seat but gain storage and dining room space plus it shortens the distances from the island to the cooktops. It also removes the need for a corner carousel. We're much happier with this result. Dairy_maid, we've done what you suggested and walked through some common tasks. Overall it works reasonably well although we may keep some coffee spoons and butter knives in the scullery drawers for morning toast and coffee. We've also invested in a "silent" rangehood which has the motor on the outside of the house behind the fridge and we've upgraded the scullery sink to one that is 600 x 400 (internal size). Fabrication starts tomorrow. Woohoo. Once again, thanks so much for taking the time to respond. The design has been significantly improved with your input.

At the end of 2019 I put the finishing touches to a kitchen that was many months in the design and build process. Client Brief: My client, originally from Scotland had always dreamed of having a country kitchen with lots of detail, warmth and charm. The name Charles Rennie Mackintosh was thrown around a couple of times which certainly put the pressure on me, the clients expectations were clearly set very high but also gave me a very clear visual of the style she liked. Before: With space at a premium and two entrances in to the kitchen it was always going to be hard to change the layout of the appliances and fortunately working within this space will always be functional for that reason. After: This kitchen was all about the detail, and how to maximize the impact without taking up and loosing too much space. The pantry, which is opposite the hallway entrance had always been a square eye sore. I told my client I wanted to make it look more like a piece of furniture and vary the depth to take away from its heaviness. By having tall elegant bi-folding doors and lead light windows at the top it was definitely a Mackintosh inspired look from his amazing chairs. No sacrificing on function though as we made sure the top part of the unit was deep enough for all my clients requirements and easy to access drawers under bench height. With the main area of the kitchen I managed to get some symmetry around the oven using a blind corner to the right and drawers to the left for access and function. For simplicity of the visual I manufactured the drawers to the left of the oven with the same molding as a door, I then put them on push-to-open runners and offset the door knob to finish the balance. A beautiful hand made butler sink was sourced to give some authenticity to the space and a modern integrated dishwasher allowed us to not have too many things fighting for the limelight. depth and character we given to the design with my hand finished details from the shaped toe kicks and fluted column panels, up to the Flemish glass lead light windows and shaped cornice molding. I am very fortunate to have a fantastic stone fabricator that I work with, who fully embraced my requirements for detail. He manufactured the bench with no joins in the corners just behind the hob and sink really completing this amazing transformation. As with any renovation, the final judgement comes down to how the client reacts and feels towards their new space.. and by her reviews I know this is one very happy customer! If you would like to know more about this, any of my other projects or would like some advice on your own kitchen projects please feel free to contact me. Jack Bradbrook for Interior Fittings (NZ)