Hi Anna, I used leather for the recovering. This made things easier as it stretches quite a bit and is very forgiving. I used one piece for the backs. I stapled one end of the fabric to the bottom edge of the back, then wrapped it around back to just over the staples, folded under the raw edge and used upholstery nails to secure.

And the seating areas are different, don't try to make it look like one area. I would put minimal ( if any) teal around the black sofa. Do your dining room. Then give you living room the same respect, it is it's own space

Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

Thanks very much for all your feedback. Just to answer a few queries - the deck is directly outside the main room so the new doors open out onto it. The doors won't be French - they're just the only doors that the 3D planner I'm using had, they'll actually be large stacking doors. I've had another idea too which would be a lot more expensive but offers a completely different approach. This is quite rushed so doesn't show accurate layout of kitchen or anything like that, basically just provides an idea. Thoughts!?