I won't bother with lattice, barrels are partially obscured from the street by fencing and if I put it up I would have to work around the lattice in order to turn the valves for water. If I can just make better use of collected water I'll be happy. We are at the end of our growing season so I should be cleaning up the garden and putting it to bed for the winter, just can't seem to get motivated. We had our first frost last week. Usually, our average early frost date is 1 November. I got almost no produce from garden this year, but there is always next year. Chookchook2 I've seen some of those decorative metal panels and they are gorgeous, sure hope your budget will allow you to get some before too long. Most of our state has been on fire for a good part of the summer. The closest is across the river from us and they have been battling it for almost a month. Some friends have had to evacuate repeatedly. We've only been concerned once, a small grass fire on our side of the river on a day we had wind gusts up to 65mph. Fortunately, it was put out quickly. Australia and New Zealand have both sent firefighters to help with the blazes. I can't begin to tell you how appreciative we are. The closest fire was fought for almost a week by local volunteers only as there were no other resources available. They were all on other fires. The Army National Guard (reserve troops) were called out to help with support duties and for the first time ever the federal Department of Natural Resources (DNR) asked for civilian volunteers to help with non firefighting tasks, cutting fire breaks, moving supplies etc.

@thinkforothers, Ha-ha that's so funny about your American trip but yes I use the duvet as a top sheet. As for getting the dooda back into the cover, I have a pretty simple method and it doesn't take allot of effort nor does it include being swallowed up by the duvet in the process as you said ha-ha..... but there is a bit of back and forth around the bed. I flick the duvet open onto the bed, I grab the one corner of the doona head up towards the respective corner and pull the duvet back towards my hand a little too and place it down, repeat on the other side, then I grab each top corner seperately holding the doona firmly in the corner and pull it up to the headboard, whilst walking back to the end of the bed I lift the cover slightly, allowing the doona to get further swallowed up by the cover, then I'm left with slipping either corner of the doona into the duvet. I do up the buttons then holding the bottom of the duvet, I flick the cover, towards the headboard, so that the doona edges forward in the cover and even flick the doona on both sides of the bed left to right and vice versa and it's usually perfect. Its very easy doing a single doona by again spreading the duvet over the bed, grab the doona corners, one in each hand, walk them up to the corners, lay it down then pick up the dooda by the top corners and shake a few times just straight down, even stand on a safe stool or on the bed and you will usually find the duvet with eaze it's way down with just the bottom corners to slip in and again voila!!! Unfortunately, when I bought two of my duvet sets from Ezibuy, I bought NZ king which is a bit wider that an Australian king size and I didn't know that at the time and I have a bit of slack on the sides but it doesn't cause any problems and what I mean by this is, that the doona doesn't slip all the way to the left or right, it does stay in place. Hope that explanation was clear, I should do a video ha-ha Cheers, Barbara

Lighting is one of the most crucial areas to get right in the kitchen. It's where you're going to create your best meals and entertain family and friends so it needs to be well lit. Even a really well designed kitchen can fall flat if it is not easy to use at night because of lack of lighting. Kitchen lighting comes in a huge array of styles, designs and features. When designing your new kitchen the types of light to consider are task lighting, ambiance lighting, feature lighting and natural light. Task lighting In your cooking area, task lighting is vital. Whilst rangehood lights are really important for lighting up the cooking zone, LED strip lights underneath overhead cabinets can be used to light the whole working bench space. LED strip lighting is bright and can be used with a dimmer for an ambient glow after you've finished cooking. Using a sensor switch omits the need to touch a switch when hands are dirty. If you don't have overhead cabinets, ceiling downlights are a really great way of making sure there's plenty of light for preparation and cooking. In preparation and task areas, use downlights or spotlights and make sure these are placed in front of where you'll be standing to avoid creating a shadow that will be difficult to work in. Ambiance lighting Mood and ambient lighting are really important in the kitchen. Overhead lights at the kitchen island or breakfast bar can be a feature as well as adding ambiance to your space. Make sure they are dimmable, particularly in an open plan space so they can be turned down when the kitchen is not in use. LED strip lighting behind a splashback or underneath an island bench top are another way to achieve ambiance - especially when the room is also a dining and living space. Feature lighting Add your personality statement to your new kitchen with feature lighting. The opportunities are endless - it can be a feature piece, a textural element or your favourite colour. You can even add a tech aspect to your kitchen lighting with smart lights that are able to be controlled from your phone! Natural light Natural light is one of the most crucial types of light to work into your space – but of course it's often one of the most difficult! Here is an example where the homeowners used skylights to let that light shine down into an area that would have otherwise been quite dark. It's also possible to borrow light from adjoining spaces by removing walls and opening up the living areas. Alternatively, if your ceilings are high adding a clerestory window may help. LEDs The biggest change in recent years in lighting has been Technology. With the introduction of Light Emitting Diodes (LEDs) the options for lighting up your new kitchen are almost endless. The energy efficient nature of LEDs allows them to produce brighter light than other types of bulbs while using less power. LEDs are ideal for use in the kitchen because they have very little heat emission, there are many colour choices including cool and warm whites, and just about any colour of the rainbow if that's your thing! LEDs are small and discreet and are therefore really easy to fit into cabinetry and underneath overhanging bench tops. Using LEDs means there's no swapping bulbs every couple of months and because they use low wattage, you'll save power too! There are many types of LED lighting including strip lighting, hanging, ceiling downlights and in-cabinet downlights.

Thank you for sharing your experience with condensation forming on your low-pitch roof, and for reaching out for advice on how to prevent this from happening during your roof replacement. One possible solution could be to add venting cavity battens on top of the purlins, which would allow for ventilation and help to reduce condensation. This would create a small air gap between the roof underlay and the insulation, which would allow for any moisture to escape. Additionally, using a suitable roof underlay, such as the Thermocraft Covertech 201 that you mentioned, could also help to prevent moisture from penetrating into the insulation. Overall, it's important to consult with a professional roofer or contractor who can recommend the best course of action based on your specific situation and the type of roofing materials being used. They can help you to choose the appropriate ventilation and insulation systems that will work best to prevent condensation and protect your home from moisture-related issues. Good luck with your roof replacement, and I hope you find a solution that works for you!