You have a good nice project planned here, with your kitchen now a part of large living space. Here, though, are some cautions and suggestions. Your extra-large peninisula counter and full window wall over the sink seem to be features that you like and want - but they also cause some problems with this plan. If two people are ever in the kitchen, one will be trapped there. And even for one, the peninsula forces an irritating hike around it to the table for serving and clean-up. Table and array of counter stools are uncomfortably close together, creating congestion especially when occupied. And while your back wall may well contain a fridge, wall ovens, pantry and cook-top, it would just barely do so - and leave no other space at all for counter. This, together with your nice bank of windows on the outside wall leave no space at all for upper cabinet dish storage. I agree with Laurie that an island here would be much preferable. I would put the sink and dishwasher on an island, with fewer stools, and some mid-height dish storage - letting gatherings of more than two or three enjoy the table in a conversational arrangement instead of facing away from the room in a row. I would also minimize the window array a bit, and extend the kitchen toward the dining table window a foot or so - and put the wall ovens at this end of the "L" - with no side wall at the left. This would distribute your countertop space more happily among your work stations, allow for some upper cabinet storage, and make the kitchen feel more part of the nice big room, instead of separated from it by the peninsula. Perhaps a careful in-person visit with a kitchen designer would be wise before you build this fun new addition. Good luck! Mark

Thanks Mel. We'll see what we can do to make the rumpus enclosed - it's probably more of a "man cave" at the moment :) Grandad had a dining table in his current place (which is bigger) and got rid of it because he never used it. He also wants more bench space than he currently has. So, this was a deliberate choice rather than a compromise due to lack of space. You've reminded me now that someone did warn us earlier in the design process about the back and forth between wardrobe and bathroom becoming annoying over time. We don't currently have an en suite so it feels wonderfully convenient for us by comparison. However, that feeling will change if we realise it could have been even better. We did have the en suite off the wardrobe in some designs but have been warned this can lead to dampness in your clothes no matter how well ventilated the bathroom is (especially in Auckland's humidity). Would love to hear people's experiences of this configuration - good and bad. On top of that, there are lovely private bush views to the south so we've tried to make the most of those.

I am blown away from down under by the help that you all have freely given .... thank you sooo much indeed. who would have thought after a year of anguish that I would be put out of my misery! If I do go for the atlantic for chairs I will bring in plum touches and vice versa. Will now need to go and find some plum that closely aligns with your suggestions. Thanks for saying we can keep table! It is a good solid NZ made oak one ... chairs were all the rage back about 18 years ago! Now need to go! I will put up a pic of a rug that was quite nice but rather expensive so ... might be in an hour or so. Thank you so much again.

At the end of 2019 I put the finishing touches to a kitchen that was many months in the design and build process. Client Brief: My client, originally from Scotland had always dreamed of having a country kitchen with lots of detail, warmth and charm. The name Charles Rennie Mackintosh was thrown around a couple of times which certainly put the pressure on me, the clients expectations were clearly set very high but also gave me a very clear visual of the style she liked. Before: With space at a premium and two entrances in to the kitchen it was always going to be hard to change the layout of the appliances and fortunately working within this space will always be functional for that reason. After: This kitchen was all about the detail, and how to maximize the impact without taking up and loosing too much space. The pantry, which is opposite the hallway entrance had always been a square eye sore. I told my client I wanted to make it look more like a piece of furniture and vary the depth to take away from its heaviness. By having tall elegant bi-folding doors and lead light windows at the top it was definitely a Mackintosh inspired look from his amazing chairs. No sacrificing on function though as we made sure the top part of the unit was deep enough for all my clients requirements and easy to access drawers under bench height. With the main area of the kitchen I managed to get some symmetry around the oven using a blind corner to the right and drawers to the left for access and function. For simplicity of the visual I manufactured the drawers to the left of the oven with the same molding as a door, I then put them on push-to-open runners and offset the door knob to finish the balance. A beautiful hand made butler sink was sourced to give some authenticity to the space and a modern integrated dishwasher allowed us to not have too many things fighting for the limelight. depth and character we given to the design with my hand finished details from the shaped toe kicks and fluted column panels, up to the Flemish glass lead light windows and shaped cornice molding. I am very fortunate to have a fantastic stone fabricator that I work with, who fully embraced my requirements for detail. He manufactured the bench with no joins in the corners just behind the hob and sink really completing this amazing transformation. As with any renovation, the final judgement comes down to how the client reacts and feels towards their new space.. and by her reviews I know this is one very happy customer! If you would like to know more about this, any of my other projects or would like some advice on your own kitchen projects please feel free to contact me. Jack Bradbrook for Interior Fittings (NZ)