Because the manufacturers these days want you to repurchase they use bottom of the line powder coating which is on your black taps. doesnt matter how good the construction is underneath the black coating it will rust within 3 - 12 months. the black they use is a industrial black which holds moisture (yes it is the same family of blacks on your bullbars that are on the front of your 4wd) this is designed to look good in the showroom but break down over months. Custom powder coating when done properly and with the highest materials on the market which not many use is the best cosmetic coating in the world in my opinion. it will outlast all anodizing and chrome but not raw materials like gold, silver etc etc. regards Bling Custom Coatings and soon to be Bling Home Decor.

Hello There: Your home looks like it has some good bones and period features. No one has yet to comment on marrying subway tiles on lower walls, with tongue and groove cladding on upper walls of your space. I am thinking this finished look could well end up looking quite "busy." Lots of competing "grid" lines, etc. If I understand correctly, this space is actually, or ultimately will be, a bathroom. Perhaps you do not want a wood product on lower sections of the walls because of potential water damage, etc. That said, there are excellent paints, sealants, etc., that you could apply that would guard against this. If painting, using Zinsser Sealant as base coat is a good starting point. As another alternative, you could use much larger tiles on lower portion of walls, oriented vertically. I am thinking 12" x 18" (or 24") tiles. Of course, these are more challenging to install, given their greater size and therefore, weight. Despite this, if you have an excellent tiler, it can definitely be done. For example, you could choose glass tiles, either clear or coloured. Going even further, you could install glass panels to lower sections of walls. You could "back paint" them or not. You could apply paint or even wallpaper (with a wonderful design and colour way you'd likely never tire of) prior to installing glass panels. The wallpaper idea, especially if design is more curvilinear in nature, would not be competing with verticality of tongue and groove, but rather, would complement and enhance it. If beautiful wallpaper (or heck, even a mural or timeless design could be painted directly on walls) is applied and then covered with clear glass panels, the overall effect would be akin to that of an art installation. Naturally, glass panels would be considerably more expensive, but would provide a more seamless, less cluttered appearance. Should you like this idea, simply check what thickness of glass would work best, both for aesthetic and safety purposes. If you have a bit of time to shop around for best supplier and price point, you could well suss out a source that will not "break the bank!" :) To affix glass panels to the walls you want to use hardware that is anodized. As an idea, you could use anodized lug nuts that are usually used for automotive purposes. I just looked up "anodized lug nuts" and see they are available in wide array of wonderful, decorative colours. This hardware would be visibly holding your glass panels in permanent place, but they would be a small attractive design element, ultimately adding another layer of visual interest to your space. I believe glass panels would tie in very well with your great, textured/mottled glass panelled door and transom. Too, I think the overall look would achieve a really attractive marriage as various materials, along with period architectural features would "read:" old, new, and timeless. I realize this design concept may seem counterintuitive to you and/or others, but I can "see it" and think it could be just fab! All The Best, Sharon Black, interior designer and contractor

My vote is for the wash but not in bright white and after some selective knot primer in the same tone. You are going to want to selectively primer down about 2/3 of the knots (use a dark white tinted primer), and use a dark white / brown toned off white instead of bright white so the beams still give you dark white on bright - that would be my vote. Consider something like bm stingray tinted primer and wash on the beams. You can add glaze for more working time or put down dropcloths and use water to cut it into a wash. Test it on some other raw wood that has had tannins develop for a few years. Then put it against your white wall - your husband will get the contrast and wood grain but you'll get the quiet palette you were hoping for. They both will have architectural depth and interest.

There are some great comment here, but my take on this would be if you are going custom to take your time and look around. Many designers offer different takes on each person's preference. The colours you have are good but I'd personally would opt for a more warmer cream, with a self print pattern. I would also suggest pinch pleated curtains and not pencil pleat as you have currently, pinch pleated curtains will give you uniformed pleats from top to bottom. In addition to this I would suggest you use blackout linen to prevent light to enter the room, and possibly interlining so that you retain some thermal properties in your fixtures. Having custom made curtains are a lifetime choice for most customers, take your time and don't settle for the first company you come across. The space above your bed i would possibly add a sheer fabric roman blind which is slightly see through but enough to give you privacy if you bedroom is situated on the ground floor. You can also get the a roman blind to match your new curtains if you'd like a more repetitive theme in your bedroom. I would suggest if you do opt for a roman blind, and you are looking for a good qualities add blackout linen. If you would like a rough estimation on what you would be looking at we can assist you so you are aware of what most reputable curtain making specialist charge in this current market.