I believe the reason the tiles work well with the cabinetry is because the tile is lite in color and flat, its not rustic unlike most terracotta. The expensive cabinets work fine with the floors because of the smooth finish. The floor here is the focal point of this room. The Interior Designer or whoever did this room, did a very nice job, keeping it very simple.

Hi Please disregard the attached plan (not part of this house), sorry for confusion Matt

You have "wear through" which is when the finish is pierced and the wood is exposed to the elements. The dark areas are where dirk/water/mud have stained the floor. It is possible to get this out... but probably not all the way. A floor that has wear through needs to be sanded right down, stained (if you wish) and then refinished. Patching can occur...but it is almost always a waste of time because the "look" can be very different from the original sitting right next to it. I don't recommend it for your situation. The second photo shows the deep scratching. Ideally, you would have had your floors looked after BEFORE wear-through occurs. There are some "regular" scratches to the Left in photo 2. You can see it is visible...but no discolouration....THAT is where you draw the line. The darker "wear through" to the Right in photo 2 = too late = full sand and refinish. If you catch it BEFORE wear-through, you can do a "buff and coat". This is a light sanding with a few coats of high end finish over top. The buff and coat is roughly half the price (in Canada at least) as a full sand/refinish. For this reason it is important to catch the floors before you get to this level of scratching.. That being said, you now get to pick some stains (test patch, test patch, test patch). The first photo shows two different woods...you could ask to see if the lighter would could be matched to the darker wood (lots of testing to achieve this). It won't be pefect...but then again you wouldn't have used reclaimed building materials if you were after "perfect". The match can lessen the colour variation to a more manageable (design wise) level. As for "good for dogs" - natural colour of wood = best colour for scratches. A lower gloss (like a satin) can help. You can ask for the "best" finish with scratch resistance that comes in a can. You will pay a premium for it...but it could/should save you thousands of dollars over the long run. A highend, scratch resistant finish means you can get away with the cheaper buff and coats (every 7-12 years...or so) and be able to retain the original (expensive) finish for the full 25 years. The other thing to note: dogs claws require trimming 2-4 PER MONTH when working with hardwoods. This is what the hardwood flooring refers to as "routine" trimming. Some of my clients thought "2-3 PER YEAR" was "routine". I laughed. You have heavy, high energy, powerful dogs. A single lab can cause some damage over time. Two labs can do a number on a floor. Three labs and you have a very short lived hardwood finish. You have 7. I would find the most expensive, scratch resistant finish available in Australia. I would have the maximum amount of finished put your floors (you will pay extra) it and I would budget for a "buff and coat" every 5-7 years.

One option you could opt for is to get a marble mosaic flooring. It is very durable and easy to clean. Furthermore, you can get virtually any rug pattern, design and color palette of your choice incorporated. Bonus: Marble mosaics work great in high-traffic areas. Here are some of our intricately handcrafted mosaic rugs and medallions so you get an idea of how they look: You don't need to worry about the shape and size. That's the beauty of mosaic, it can be customized to fit any surface. See anything you like? Have a favorite photo or pattern you'd like to be converted to a mosaic masterpiece? We can help! If you have any queries feel free to contact us. For more designs visit our website: MEC Artworks. Regards, Nada Zain