~$400 including expedited shipping. My GC just had his regular countertop guy do them, which wasn't great.... he had trouble making clean cuts. If I were going to do it again I would have pressed for someone with expertise to cut them. You can see in the image that the facing is not made of the stone peak, because too much was broken during the cutting to make the mitered edge. I'm a little bummed, but mostly pleased with the surface (which is the important part) thus far.

on the landscape plan - The road frontage is the left hand curved side & the black rectangle is the position of the outdoor fire.

Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

Here's a couple of ideas that work really well as alternatives to a walk in pantry. They integrate into your wall cabinetry, allowing you to keep central spaces open and free flowing. Using drawers to create a pantry as Esselai suggests. Check out how Harn Triomax soft close drawers are used in just this way. Availble in classic white or metallic grey. Two front to back depth options - 500mm and 5500mm. And 8 drawer width options from 450mm to 1200mm. Alternatively, there are a number of quality pull out pantry options in the German designed and made Vauth-Sagel range. Some are installed with fixed fronts to match your cabinetry, and others are installed behind hinged doors. See below (from top to bottom) the VSA model, DUSA model and HSA model. These all come in a variety of width options and specs, from chromed wire shelves to sold bases with glass panelling.