I think it is awesome to give a piece of furniture a new life. It is sometimes a bit daunting to take a paint brush to a piece made from genuine old timber but if you are going to get many more years of life and enjoyment out of it I think it is better than dumping it. I believe it shows your love. jbof4 I started with a heat gun to remove most of the many layers of paint, (some are easier than others to strip this way). Then I used an orbital sander and sanded and sanded and sanded. You might also try liquid paint stripper although I find this very messy. I believe you can also get them professionally stripped. Good luck with the resurrection, go for it what have you got to lose.

based on the drawing, the wall where the bed is. HOWEVER, you mentioned that this drawing is not a true depiction of the furniture you will use and the wallpaper. if that is the case, i think the wall paper can work on either wall, it all depends on how busy this wallpaper is and how "plain" the bed is. if you go with a busy wallpaper behind the bed, you may want to keep your bed and bedding on the minimal side so that there is a good visual balance to the overall composition. if you go with snazzier bedroom furniture, then a busy wallpaper may be a bit much and you may want to put it on the other wall or use a textural option to serve as the bed's background rather then another focal point.

Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

If you think hitting the lamps could be an issue, just move them a bit and add some low accessories (opposite sides to pic below). It's better to have a bit larger lamps and with your ceiling height anything shorter would look skimpy and they don't overwhelm the bedside tables once you balance with something above the bed. Just a thought...if you accessorize your bedding with some soft colors, they will also help to compliment the glass and crystal. You could even change the hardware to a silver.