Hello There: Your home looks like it has some good bones and period features. No one has yet to comment on marrying subway tiles on lower walls, with tongue and groove cladding on upper walls of your space. I am thinking this finished look could well end up looking quite "busy." Lots of competing "grid" lines, etc. If I understand correctly, this space is actually, or ultimately will be, a bathroom. Perhaps you do not want a wood product on lower sections of the walls because of potential water damage, etc. That said, there are excellent paints, sealants, etc., that you could apply that would guard against this. If painting, using Zinsser Sealant as base coat is a good starting point. As another alternative, you could use much larger tiles on lower portion of walls, oriented vertically. I am thinking 12" x 18" (or 24") tiles. Of course, these are more challenging to install, given their greater size and therefore, weight. Despite this, if you have an excellent tiler, it can definitely be done. For example, you could choose glass tiles, either clear or coloured. Going even further, you could install glass panels to lower sections of walls. You could "back paint" them or not. You could apply paint or even wallpaper (with a wonderful design and colour way you'd likely never tire of) prior to installing glass panels. The wallpaper idea, especially if design is more curvilinear in nature, would not be competing with verticality of tongue and groove, but rather, would complement and enhance it. If beautiful wallpaper (or heck, even a mural or timeless design could be painted directly on walls) is applied and then covered with clear glass panels, the overall effect would be akin to that of an art installation. Naturally, glass panels would be considerably more expensive, but would provide a more seamless, less cluttered appearance. Should you like this idea, simply check what thickness of glass would work best, both for aesthetic and safety purposes. If you have a bit of time to shop around for best supplier and price point, you could well suss out a source that will not "break the bank!" :) To affix glass panels to the walls you want to use hardware that is anodized. As an idea, you could use anodized lug nuts that are usually used for automotive purposes. I just looked up "anodized lug nuts" and see they are available in wide array of wonderful, decorative colours. This hardware would be visibly holding your glass panels in permanent place, but they would be a small attractive design element, ultimately adding another layer of visual interest to your space. I believe glass panels would tie in very well with your great, textured/mottled glass panelled door and transom. Too, I think the overall look would achieve a really attractive marriage as various materials, along with period architectural features would "read:" old, new, and timeless. I realize this design concept may seem counterintuitive to you and/or others, but I can "see it" and think it could be just fab! All The Best, Sharon Black, interior designer and contractor

Unless buying custom manufactured wood cabinets, you are buying a series of boxes. A 100k euro kitchen installation of an Italian kitchen is one example from my portfolio. Differences are found in the hardware, the door/drawer pulls, weight of doors and exterior finishes. It is about the design, first. In our region, you can knock off 1200-2000 just be sticking with a full depth fridge--but it is design that will make it possible to install full depth and get a counter depth effect. In the Garden Oaks Fine Accommodation residential display suite I needed to prove that a high-end design can be executed for less. Again, it is design that does the trick. The owner of the kitchen above loves the pendants over the breakfast counter. I did not have the heart to reveal the price--$19 each. That owner likes/needs bling so the 14k euro chandeliers (2) in the foyer are a feature. But we get more comments on our pendants--because they are integral to the overall design. Real estate agents have pegged this kitchen at anywhere from 45-75k. It cost under 30k. DYI projects offer the opportunity to take the time that you might not otherwise allow to a designer (hence our need to come equipped with knowledge, contacts and suppliers that augment our services). I recommend drawing from images (Houzz is great for that) to start, then researching suppliers, collecting specs, and developing a document that covers all aspects of the kitchen from lifestyle needs to style to comparisons of product reviews. Whittle it down to an instruction for purchase and installation. Consider challenges such as the dreadful corner cabinet turntable and splurge on solutions that make your design truly functional. You'll appreciate the expense that delivers practical functionality. There are remarkable solutions for the corner cabinet--but my fav is to determine whether that space can become storage (cabinet or drawers) in an adjoining room. When not practical, articulated pull-out stainless shelves are functional--and cool. Undermounted sinks are great for clean-line counters. Well placed recessed lighting (design again) eliminates the need for other fixtures--and allows you free rein to purchase for focal point impact or (my preference) to fit seamlesly into the overall look. Enjoy the journey--have fun!

Thanks for the replies! My wife suggested we talk to a local real estate agent, so i think that is a good idea... just that Im not sure how helpful they are likely to be if we arent selling yet :) As for saving for our dream house, I dont disagree, however if doing this up nicely over the next ~5 years or so while we live here nets us some extra in the eventual sale, then that of course will help us as well. Interesting thing happened today actually. I got a knock on the door and one of the older neighbours asked if he could take some lemons from the tree. I of course said yes. Anyway he was telling me he had lived in the street for 40 years. I asked him if the house had always looked like this, and he said no that ~30 years ago the old old owner did a massive renovation and pulled off the timber and put up the bricks and gutted the inside of the house. Interesting stuff!

after watching my daughter and her husband agonize over the way their expensive timber floor has not held up well after 3 years, I would recommend tiles/wood look tiles with under heating. Their beautiful warm expensive floor looks like it always needs a clean and polish, not from neglect, they have cared for it well. One of the boards now has a slight and painful moan when it's stepped on :-( I grew up in a completely wood floor home and although it looked wonderful, my Mother hated it. ....and the mats ! Wood is a lot harder to maintain than tiles ,(no matter what the die hards say) the modern wood finishes are much better than they used to be.... But a piece of wood is rather arty no matter what it's used for and it does demand to be loved and cared for.....and if something goes wrong it's a lot more expensive to fix than sand and cement. Ultimately you have to be happy. BTW underheating tiles is warmer than timber :-)