Hi again- I have been looking at Benjamin Moores colors and have chosen a few you might look at. My technique for color choices is to buy several large sheets of MDF from the hardware and several paint samples that I think will work. Grab a plain white sample pot as well and just play with colors; if what you thought looked good in the shop and doesn't look good in reality, just add a bit of the white to lighten it and use the darker tones to deepen. Once you've found the color you like paint it on one of the large MDF sheets and live with it for a day or two and see how it looks morning,night, south side of building,northside of building. If the color that you like is one that you've mixed yourself, just go back to the paintshop as I'm sure B Moore would have the right shade so you can match it. Do you know the color name of the roofing? Is it IRONSTONE or MONUMENT? I'd be tempted to use that same color for the windows. My personal trick for contrast and trims is to take the main color and ask paint shop to make it up in 1/4 strength even lighter if need be. Good luck and post pictures when it's finished.

I would like a warm mushroomy gray with darker brown/charcoal for the trim and window framing. Also, trim the bushes out front so we can see where the front door is...

We asked a similar question when we bought our piece of bare land. We were advised that building a simple shape would reduce costs... so we've built a t shape. Single story is almost always cheaper. We have a builder who is happy to let us do a lot of work with him. We also choose to live on site, which saves us a lot in fuel. The kids and I clean up the building site most days. We've been able to separate the rubbish out between actual rubbish and recyclable material. As for cladding, we were going to do a mix of corrugated iron with plywood board and batten. But given some of the additional hassles, I don't think there's much in it cost wise. However, in saying all that, we chose to invest in long term benefits, so our house is exactly what we want and should be cheap to run. We were hoping to build for $1800 /sq m but we're still coming out at about the $2000 mark.

I desperately in need of advice as I cannot make a decission.... sorry, pics are in comments as I could not attach them here, new to this.... 1. I am unsure which colour to paint the front door, the wooden has an ugly stained brownish colour, happy to sand or to paint, but mental block about colour - grey/black or white? 2. Thinking about recladding the bricks with horizontal wooden slates as per last pic.Is that a good idea? Not suited? Friends say too expansive here in NZ but i am happy to pay if it will suit the house. 3.Shall we put a deck in front of the french door connecting the entrance, which I would then cover with wood as well to get rid of the concrete. Too much wood? And what about the planters, leave the bricks, cover as well, I prefer to cover them.Input much appriciate as my dear partner would leave it as is:) House specs: 1951 house, render, with the bit of fake brick in the front. The entrance face the front garden, it is visible from the street through trees.I love the good size garden, obviously the deck will take a bit away, hence I would not choose a big deck. My thought deck and then one step down to sit on as well, if that makes sense.Thanks for everybodies input - i am in the brainstorming phase. We are in the South Island New Zealand. Sorry, struggling with uploading pics. I will keep trying to get the photo of the whole house up.Screen just turns white when i try to upload