I have same thing on white. It's a pita to keep clean. I was told you need to have the ceramic treated with something in order to protect it. I guess with that its ok. I would go for black one rather.

Thanks for all the great ideas everyone and sorry I didn't explain the polycarbonate a bit better :) This is along the lines of what we'll be using... http://www.psp.co.nz/building-brands/corrugated-sheeting/suntuf-polycarbonate The area is an absolute sun trap and we're hoping to use it as an extension to our living space, especially on rainy days! I've just sent my husband out to get a few pots of different stains for is to try - darkest brown (cedar) and a lighter brown (rustic oak) both by Cabots + the black we already have. Hopefully we can decide between one of those! I probably should have mentioned we will have black aluminium pool fencing running along the top of the second retaining wall - so the real question is do we keep everything black (pool fencing, horizontal fence, retaining walls and pergola) or do we go with a dark (or even light) brown for the pergola and retaining walls.... We just keep going around in circles at the moment. Decisions, decisions! Thanks again :)

Hi. We moved into our home in Central Otago in 2013. It had been built around 2000 and clad with Oregon and Plaster. It was evident that this house was tired with the most pressing need the rescuing of the Oregon cladding. It was well overdue for a recoat. On much appreciated advice from a Resene Rep we bleached (Moss and Mould Killer) and scrubbed (Timber and Deck Wash) then coated with Resene Waterborne Woodsman in Nutmeg with CoolColour, This took up my summers of 2014, 2015 and part of 2016 the remainder of which was taken up overhauling the plaster. This summer I have tied in the entrance slat fence. Unfortunatelyn we were let down by Resene in early 2015 with an unannounced change of formula resulting in out of stocks and worst of all colour changes. Nutmeg which previously was a warm brown definitely moved into the orange spectrum. Resene WW is meant to be recoated every 18-24 months so strictly speaking I can't physically keep up with the staining let alone have a life as well. Stripping back is not an option, no no no. What compatible product would you recommend that definitely lasts longer than Resene WW? Where can I find LRV for Resene WW in case I need to stick with that but change the colour? Sadly I can't find information on comparing products across brands as reps only compare between their own products. Many thanks.

Can I have some feedback on the different dryers - heat pump and condenser - and the best brands We are a family of 7 living in Wellington NZ with plenty of wet weather!