Hello people, Question time again. Im trying to match indoor and outdoor colour to my project around the living and pool area. I have 10 Meters of space to work with which includes 5 meters width of the living area. If i break the colours indoor v's outdoor it will make my area look smaller, more confined ? If i use polished concrete inside and try and match the colour outside, the surface will get hot. Soooooo... I have added some photos here. I went and purchased a box of man made granit tiles 80x 80cm. Keeping the shiny for the inside and tried "honing" the surface of the other tile as a test so i could use it outside and keeping the surface of the 'honed tile" slightly textured to ensure not so slippery and matching the inside colour. After coating this honed tile it has gone slightly darker which is ok. What im wanting to know, is this ok to do ? will there be any down the line effects of the tile if its outside in a wet area ? it maybe only wet for 3 months of the year for a few hours at a time. My challenge here is price V's product / Styling / practacality -Timber is too expensive for outdoor application / requires maintenance -Marble expensive -Natural stone expensive also if anyone has any solutions / kmowledge / advice it its ok to hone an indoor tile and add a protective coating for the outside. this would be much appreciated. Thanks Houzz'ers! Justin :)

@thinkforothers, Ha-ha that's so funny about your American trip but yes I use the duvet as a top sheet. As for getting the dooda back into the cover, I have a pretty simple method and it doesn't take allot of effort nor does it include being swallowed up by the duvet in the process as you said ha-ha..... but there is a bit of back and forth around the bed. I flick the duvet open onto the bed, I grab the one corner of the doona head up towards the respective corner and pull the duvet back towards my hand a little too and place it down, repeat on the other side, then I grab each top corner seperately holding the doona firmly in the corner and pull it up to the headboard, whilst walking back to the end of the bed I lift the cover slightly, allowing the doona to get further swallowed up by the cover, then I'm left with slipping either corner of the doona into the duvet. I do up the buttons then holding the bottom of the duvet, I flick the cover, towards the headboard, so that the doona edges forward in the cover and even flick the doona on both sides of the bed left to right and vice versa and it's usually perfect. Its very easy doing a single doona by again spreading the duvet over the bed, grab the doona corners, one in each hand, walk them up to the corners, lay it down then pick up the dooda by the top corners and shake a few times just straight down, even stand on a safe stool or on the bed and you will usually find the duvet with eaze it's way down with just the bottom corners to slip in and again voila!!! Unfortunately, when I bought two of my duvet sets from Ezibuy, I bought NZ king which is a bit wider that an Australian king size and I didn't know that at the time and I have a bit of slack on the sides but it doesn't cause any problems and what I mean by this is, that the doona doesn't slip all the way to the left or right, it does stay in place. Hope that explanation was clear, I should do a video ha-ha Cheers, Barbara

Thanks for the replies! My wife suggested we talk to a local real estate agent, so i think that is a good idea... just that Im not sure how helpful they are likely to be if we arent selling yet :) As for saving for our dream house, I dont disagree, however if doing this up nicely over the next ~5 years or so while we live here nets us some extra in the eventual sale, then that of course will help us as well. Interesting thing happened today actually. I got a knock on the door and one of the older neighbours asked if he could take some lemons from the tree. I of course said yes. Anyway he was telling me he had lived in the street for 40 years. I asked him if the house had always looked like this, and he said no that ~30 years ago the old old owner did a massive renovation and pulled off the timber and put up the bricks and gutted the inside of the house. Interesting stuff!

Hi, Thanks for the response. :) I am following CCC Residential Suburban and Residential Suburban Density Transition Zone. It seems you can build 1m from boundary without having a window facing the boundary. I thought it seemed close, but if it gives me more space on the sunny side of the property then I'm happy. I wasn't sure how worthwhile it was me building interior/external walls into my design. I think a real draftsman would only use my dimensions as a guide and bin my project designs. I've only used the boundary line to design the entire thing, then used some Objects to give a visual guideline.